AGFA DX-D 400 User Manual page 107

5.1.3 WORKSTATION SELECTION
BUTTON ICON
1
2
3
4
5
6
Note.- - Workstation data such as Icon, X-ray Tube, Receptor, Ion Chambers, etc... must be registered.
0232F EN 20191213
The Workstations are configured according to the customer preferences during
the installation procedure (Icon, X-ray Tube, Device, Ion Chamber, etc.). Each
button selects its respective Workstation (only the selected button is
highlighted).
The Workstations are directly selected by touching the respective button.
Write down the configuration of the Workstation assigned to each button in the
table.
WORKSTATION (Tube, Device, Ion Chamber, etc.)
DX-D 400
User Manual
97