3.1 Arm #1 Top Cover
■ When mounting the cover, be careful not to get the cables caught in it or bend
them forcibly to push into the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure. These are extremely hazardous and may result in electric
CAUTION
shock and/or improper function of the robot system.
When routing the cables, check the cable locations at removing the cover. Be
sure to place the cables back to their original locations.
3.2 Arm #1 Side Cover
■ When mounting the cover, be careful not to get the cables caught in it or bend
them forcibly to push into the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure. These are extremely hazardous and may result in electric
CAUTION
shock and/or improper function of the robot system.
When routing the cables, check the cable locations at removing the cover. Be
sure to place the cables back to their original locations.
4-M3×8
(Cross recessed truss
head small screws)
Tightening torque: 0.45±0.1 N·m
C Series Maintenance Manual Rev.2
3-M3×8
(Cross recessed truss head small screws)
Tightening torque: 0.45±0.1 N·m
Arm #1 top cover
Arm#1 side cover
C4 Maintenance 3. Covers
4-M3×8
(Cross recessed truss
head small screws)
Tightening torque: 0.45±0.1 N·m
15