General Maintenance; Maintenance Inspection; Schedule For Maintenance Inspection - Epson C Series Maintenance Manual

6-axis robots

Hide thumbs Also See for C Series:

Table of Contents

2. General Maintenance

This chapter describes maintenance inspection procedures.

inspection properly is essential to prevent trouble and ensure safety.

Be sure to perform the maintenance inspections in accordance with the schedule.

Inspection points are divided into five stages: daily, monthly, quarterly, biannual, and annual.

The inspection points are added every stage.

If the Manipulator is operated for 250 hours or longer per month, the inspection points must

be added every 250 hours, 750 hours, 1500 hours, and 3000 hours operation.

1 month (250 h)

2 months (500 h)

3 months (750 h)

4 months (1000 h)

5 months (1250 h)

6 months (1500 h)

7 months (1750 h)

8 months (2000 h)

9 months (2250 h)

10 months (2500 h)

11 months (2750 h)

12 months (3000 h)

13 months (3250 h)

C Series Maintenance Manual Rev.2

C4 Maintenance 2. General Maintenance

Inspection Point

Performing maintenance

(replacement)