Envision X14 CSI/DSI Analyzer/Generator - Quick Start Guide
3 Getting Started
This chapter explains what is involved in getting your Envision X14 up
and operating.
3.1
What is in the Envision X14 Shipping Box?
The Teledyne LeCroy Envision X14 is shipped with the following items:
•
AC Power Line Cord
•
CE Declaration of Conformity
•
SMP cables (4) for D-Phy/C-Phy connections
•
SMA cable (1) for Trigger In/Out
•
Ethernet cable for connecting host PC running VPS GUI
•
Mouse for control with an external display connected to the HDMI
port.
•
This Quick Start Guide
3.2
Connectors and Controls
The table below describes the Envision X14 connectors and controls.
Envision X14 Front & Rear Panels
Envision X14 Front Panel
A
F
Envision X14 Rear Panel
Page 6
D
B
C
H
G
Information / Function
Front panel features:
▪ A – Power button; press and
release (with LED color modes,
set).
E
▪ B – LCD display for status and
control.
▪ C – LCD display configuration
controller (not currently used).
▪ D – USB ports (2) used for
connecting a mouse and
keyboard.
▪ E – I2C port for CSI-2 CCI control.
▪ F – SMP connecors for C-Phy
and D-Phy connections to DUT.
▪ G – D-Phy clock.
▪ H – Auxiliary port for future use.
Rear panel features:
February 22, 2024