System Checks - GE LOGIQ 9 Technical Manual

Hide thumbs Also See for LOGIQ 9:

Table of Contents

2294854-100, R

Section 3-12

Loading Base Image Software

System Checks

1.) From the Windows mode display, double-click (RIGHT SET key) on the My Computer icon.

2.) Check the drive letter assignments for the Compact Disk and Removable Disk. They should

3.) If the Drive letter assignments are properly mapped, proceed to loading applications software.

4.) If the customer has a USB (Digital Priters) to be install, plug it in now. The system is still in

If the printer is installed while in application mode, excessive CPU time will be consumed and

the system will become very slow to unusable. Shutting down and rebooting will clear the

condition. The printer will function correctly.

5.) Check your Service Dongle. Plug in your Service Dongle to ensure that it is recognized and

PROPRIETARY TO GE

be Compact Disk (G) and Removable Disk (H).

If the assignments are reversed, proceed to remap the drives manually.

Windows mode and should recognize the printer and install the necessary driver. If you do not

install the printer until after the Applications software has been loaded, you will need a service

dongle to get into windows and manually install the printers. Print a test page to check the

printer installation.

Chapter 3 Installation