B&R Automation PC 3100 User Manual page 94

Technical data
Model number
CAN
Quantity
Variant
Transfer rate
Terminating resistor
Type
Default setting
X2X
Type
Quantity
Variant
Electrical properties
Power consumption
Operating conditions
Pollution degree per EN 61131-2
Ambient conditions
Temperature
Operation
Storage
Transport
Relative humidity
Operation
Storage
Transport
Mechanical properties
Weight
1) For additional information, see Automation Help (Communication - POWERLINK - General - Hardware - IF / LS).
2) For detailed information, see the temperature tables in the user's manual.
4.7.4.14.3.1 POWERLINK interface - Pinout
The POWERLINK interface is available in the IF option 2 slot.
Variant
Wiring
Cable length
LED "Link" (a)
Orange (light)
LED "Status" (b)
Green/Red
1) The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
POWERLINK commissioning and operation
For a description of the operating modes, status and node numbers of the POWERLINK interface(s), see
"LED "S/E" (LED "Status/Error")" on page
94
POWERLINK
RJ45, female
S/STP (Cat 5e)
Max. 100 m (min. Cat 5e)
On
Link (a connection to a POW-
ERLINK network exists)
On
POWERLINK status
"LED "S/E" (LED "Status/Error")" on page 242
242.
5ACCIF02.FPSC-000
1
10-pin, male, galvanically isolated
Max. 1 Mbit/s
Can be switched on and off with slide switch
Off
X2X Link master
1
10-pin, male, galvanically isolated
2 W
Pollution degree 2
0 to 55°C
2)
-20 to 60°C
-20 to 60°C
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 100 g
1)
Active
Blinking (data be-
ing transferred)
Off
Automation PC 3100 User's manual V 2.10