Create Raid Volume - B&R Automation PC 3100 User Manual

7.3.1.2 Create RAID volume

Enter a unique volume name that has no special characters and is
[ ]-Change
­¯
BIOS parameter
Name
RAID level
1)
Disks
2)
Strip size
3)
Capacity
Sync
4)
Create volume
1) Grayed-out parameters cannot be modified in the currently selected RAID level.
2) This setting is only possible if RAID level is set to Recovery.
3) This setting is only possible if RAID level is set to RAID0(Stripe).
4) This setting is only possible if RAID level is set to Recovery.
Automation PC 3100 User's manual V 2.10
Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.3054
Copyright(C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name: Mirror
RAID LEVEL: RAID1(Mirror)
Disks: Select Disk
Strip Size: N/A
Capacity: 59.6 GB
Sync:
N/A
Create Volume
16 characters or less.
[TAB]-Next
Figure 14: Creating a RAID volume
Setting options Description
String Name for the RAID volume
Default: Volume1 No special characters are permitted.
Range: Max. 16 characters
RAID0 (Stripes) Selects the RAID level
RAID1 (Mirror)
Recovery
Master Defines the storage media mode
Recovery
4 kB Selects the data block size [kB]
8 kB
16 kB
32 kB
64 kB
128 kB
INT Defines the RAID memory size
Range: Hardware-dependent
If storage media of different sizes are used, this is limited to the smaller medium.
Continuous
Selects the synchronization mode
On request
Enter Creates a RAID volume according to the configuration
Table 132: Configuration Utility - Create RAID volume
]
[ HELP ]
[ESC]-Previous Menu [ENTER]-Select
Software
183