B&R Automation PC 3100 User Manual page 64

Technical data
Model number
Relative humidity
Operation
Storage
Transport
Mechanical properties
Weight
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
3) For detailed information, see the temperature tables in the user's manual.
4.7.4.2.3.1 Pinout
Variant
Type
UART
Galvanic isolation
Transfer rate
Bus length
Pin
1
2
3
4
5
6
7
8
9
1) Not connected
4.7.4.2.3.2 I/O address and IRQ
When operated in the xPC3100:
Slot
IF option 1 (COM C)
IF option 2 (COM D)
1) The default I/O address and IRQ can be modified in BIOS.
4.7.4.2.3.3 Cable data
For more detailed information about the transfer rate, bus length or cable requirements for the respective inter-
faces/buses, see "Cable data" on page
64
Serial interface COM
RS232
DSUB, 9-pin, male
RS232, not modem supported
16550-compatible, 16-byte FIFO buffer
Yes
Max. 115 kbit/s
Max. 15 m Max. 1200 m
RS232 - Pinout RS422 - Pinout
NC.
1)
RXD
TXD
NC.
GND
NC.
RTS
CTS
NC.
I/O address
2E8h - 2EFh
338h - 33Fh
245.
5AC901.I485-00
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 34 g
RS422/485
TXD\
NC.
NC.
TXD
GND
RXD\
NC.
NC.
RXD
1)
1
6
9
5
IRQ
1)
5
7
Automation PC 3100 User's manual V 2.10