Terminal Block Ready Relay; 0Tb2104.8000; General Information; Order Data - B&R Automation PC 3100 User Manual

9.4 Terminal block ready relay

9.4.1 0TB2104.8000

9.4.1.1 General information

This 1-row, 4-pin TB2104 terminal block is used for ready relay 5AC901.IRDY-00.

9.4.1.2 Order data

Model number Short description
Terminal blocks
0TB2104.8000 Connector 24 VDC - 4-pin female - Screw clamp terminal block
2.5 mm²

9.4.1.3 Technical data

Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
Certifications
CE
UL
EAC
Terminal block
Note
Number of pins
Type of terminal block
Cable type
Pitch
Connection cross section
AWG wire
Wire end sleeves with plastic covering
Solid wires
Fine-stranded wires
With wire end sleeves
Electrical properties
Nominal voltage
Nominal current
1)
Operating conditions
Pollution degree per EN 61131-2
1) The respective limit data of the IF option must be taken into account!
Automation PC 3100 User's manual V 2.10
0TB2104.8000
Yes
cULus E115267
Industrial control equipment
Yes
Nominal data per UL
4 (female)
Screw clamp terminal block variant
Only copper wires (no aluminum wires!)
5.08 mm
26 to 14 AWG
0.2 to 1.5 mm²
0.2 to 2.5 mm²
0.2 to 1.5 mm²
0.2 to 1.5 mm²
300 V
10 A
Pollution degree 2
Accessories
Figure
227