B&R Automation PC 3100 User Manual page 58

Technical data
Pin Pinout Description
1 TMDS data 2- DVI lane 2 (negative)
2 TMDS data 2+ DVI lane 2 (positive)
3 TMDS data 2/4 SHIELD Shield for data pairs 2 and 4
4
SDL- SDL lane (negative)
5 SDL+ SDL lane (positive)
6 DDC clock DDC-based control signal (clock)
7 DDC data DDC-based control signal (data)
8 Not connected Not connected
9 TMDS data 1- DVI lane 1 (negative)
10 TMDS data 1+ DVI lane 1 (positive)
TMDS data 1/XUSB0
11 Shield of data pair 1 and USB0
SHIELD
12 XUSB0- USB lane 0 (negative)
13 XUSB0+ USB lane 0 (positive)
14 +5 V power +5 V power supply
1)
Ground (return for +5 V,
15 Ground
HSync and VSync)
1) Protected internally by a multifuse.
Information:
Hot plugging output devices on the interface for service purposes is supported by the hardware and
graphic drivers of approved operating systems. Recalibration may be required for touch screen de-
vices.
A maximum of 100 mating cycles are specified for this interface.
Information:
In SDL operation without USB type A/B cable, the USB transfer rate is limited to USB 1.1.
A USB transfer rate of USB 2.0 is possible in DVI or SDL operation with a USB type A/B cable.
4.7.3.2.3.2 Cable lengths and resolutions for SDL transfer
The following table shows the relationship between segment length and maximum resolution depending on the
SDL cable:
SDL cable
VGA
Segment length [m]
640 x 480
0.8
5CASDL.0008-00 5CASDL.0008-00 5CASDL.0008-00 5CASDL.0008-00 5CASDL.0008-00 5CASDL.0008-00 5CASDL.0008-00
5CASDL.0018-00
1.8 5CASDL.0018-01
5CASDL.0018-03
5CASDL.0050-00
5 5CASDL.0050-01
5CASDL.0050-03
6 5CASDL.0060-00 5CASDL.0060-00 5CASDL.0060-00 5CASDL.0060-00 5CASDL.0060-00 5CASDL.0060-00 5CASDL.0060-00
5CASDL.0100-00
10 5CASDL.0100-01
5CASDL.0100-03
5CASDL.0150-00
15
5CASDL.0150-01
5CASDL.0150-03
5CASDL.0200-00
20
5CASDL.0200-03
5CASDL.0250-00
25
5CASDL.0250-03
5CASDL.0300-00
30
5CASDL.0300-03
40 5CASDL.0400-13 5CASDL.0400-13 5CASDL.0400-13 5CASDL.0400-13 5CASDL.0400-13
4.7.3.2.3.3 Cable lengths and resolutions for DVI transfer
The following table shows the relationship between segment length and maximum resolution depending on the
DVI cable:
DVI cable
VGA
Segment length [m]
640 x 480
1.8
5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00
5 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00
The maximum cable length for DVI transfer is limited to 5 m due to the USB specification.
58
SVGA XGA
800 x 600 1024 x 768
5CASDL.0018-00 5CASDL.0018-00
5CASDL.0018-01 5CASDL.0018-01
5CASDL.0018-03 5CASDL.0018-03
5CASDL.0050-00 5CASDL.0050-00
5CASDL.0050-01 5CASDL.0050-01
5CASDL.0050-03 5CASDL.0050-03
5CASDL.0100-00 5CASDL.0100-00
5CASDL.0100-01 5CASDL.0100-01
5CASDL.0100-03 5CASDL.0100-03
5CASDL.0150-00 5CASDL.0150-00
5CASDL.0150-01 5CASDL.0150-01
5CASDL.0150-03 5CASDL.0150-03
5CASDL.0200-00 5CASDL.0200-00
5CASDL.0200-03 5CASDL.0200-03
5CASDL.0250-00 5CASDL.0250-00
5CASDL.0250-03 5CASDL.0250-03
5CASDL.0300-00 -
5CASDL.0300-03 5CASDL.0300-13
SVGA XGA
800 x 600 1024 x 768
Pin Pinout Description
16 HPD Hot plug detection
17 TMDS data 0- DVI lane 0 (negative)
18 TMDS data 0+ DVI lane 0 (positive)
TMDS data 0/XUSB1
19 Shield of data pair 0 and USB1
SHIELD
20 XUSB1- USB lane 1 (negative)
21 XUSB1+ USB lane 1 (positive)
22 TMDS clock shield Shield of clock pair
23 TMDS clock+ DVI clock (positive)
24 TMDS clock - DVI clock (negative)
C1 Not connected Not connected
C2 Not connected Not connected
C3 Not connected Not connected
C4 Not connected Not connected
C5 Not connected Not connected
-
Resolution
HD SXGA
1366 x 768 1280 x 1024
5CASDL.0018-00 5CASDL.0018-00
5CASDL.0018-01 5CASDL.0018-01
5CASDL.0018-03 5CASDL.0018-03
5CASDL.0050-00 5CASDL.0050-00
5CASDL.0050-01 5CASDL.0050-01
5CASDL.0050-03 5CASDL.0050-03
5CASDL.0100-00 5CASDL.0100-00
5CASDL.0100-01 5CASDL.0100-01
5CASDL.0100-03 5CASDL.0100-03
5CASDL.0150-00 5CASDL.0150-00
5CASDL.0150-01 5CASDL.0150-01
5CASDL.0150-03 5CASDL.0150-03
5CASDL.0200-00 5CASDL.0200-00
5CASDL.0200-03 5CASDL.0200-03
5CASDL.0250-00 -
5CASDL.0250-03 -
- -
5CASDL.0300-13 5CASDL.0300-13
Resolution
HD SXGA
1366 x 768 1280 x 1024
Automation PC 3100 User's manual V 2.10
-
UXGA FHD
1600 x 1200 1920 x 1080
5CASDL.0018-00 5CASDL.0018-00
5CASDL.0018-01 5CASDL.0018-01
5CASDL.0018-03 5CASDL.0018-03
5CASDL.0050-00 5CASDL.0050-00
5CASDL.0050-01 5CASDL.0050-01
5CASDL.0050-03 5CASDL.0050-03
5CASDL.0100-00 5CASDL.0100-00
5CASDL.0100-01 5CASDL.0100-01
5CASDL.0100-03 5CASDL.0100-03
- -
- -
- 5CASDL.0150-03
- -
- 5CASDL.0200-03
- -
- -
- -
- 5CASDL.0300-13
- 5CASDL.0400-13
UXGA FHD
1600 x 1200 1920 x 1080