Technical data
4.7.4.13.4 Shielding
For the interfaces on the 10-pin female connector, the shield of the interfaces can be connected to pin Shield (pin
2) of the female connector.
In addition, there is a functional ground connection on the interface cover of the system unit that can also be used
for the cable shields.
4.7.4.13.5 Driver support and firmware update
The driver is part of the Automation Runtime and the firmware is part of Automation Studio. The module is auto-
matically brought up to this level.
To update the firmware contained in Automation Studio, a hardware upgrade must be performed (see
Project management / Workspace / Upgrades in Automation Help).
92
Automation PC 3100 User's manual V 2.10