Boot - B&R Automation PC 3100 User Manual

Software

7.1.6.5 Boot

BIOS parameter
Boot type
Quick boot
Quiet boot
Network stack
PXE boot capability
PXE boot to LAN
Power up in standby support
Add boot options
ACPI selection
1)
USB boot
EFI device first
Timeout
172
Setting options Description
Dual boot type Selects the boot type
In dual boot mode, both UEFI and Legacy boot are possible and the CSM is enabled.
Legacy boot type
In Legacy boot mode, the CSM is enabled.
UEFI boot type
In UEFI boot mode, the CSM is disabled.
Disabled Disables/Enables quick boot
If quick boot is enabled, certain tests are not performed so the boot procedure is faster.
Enabled
Disabled Disables/Enables booting in text mode
Enabled
Disables/Enables the network stack
Disabled
Enabling makes ETH booting possible.
Enabled
Disabled Disables PXE boot or selects the mode
UEFI:IPV4
UEFI:IPV6
UEFI:IPV4/IVP6
Legacy
Disabled Disables/Enables PXE boot to LAN
Enabled
Disabled Disables/Enables power up in standby support
Enabled
Selects or changes the mode of arrangement in the boot sequence for newly added
Auto
devices
First
Manual mode is not fully UEFI compatible.
Manual
Last
Acpi1.0B Selects the ACPI mode
Acpi3.0
Acpi4.0
Acpi5.0
Acpi6.0
Acpi6.1
Disabled Disables/Enables USB boot
Enabled
Disabled Disables/Enables EFI device first
Enable to boot EFI devices before legacy devices. Disable to boot legacy devices before
Enabled
EFI devices.
INT Delay time until the boot list is processed [s]
Default: 0 Range: 0 to 10
Table 122: Boot
2)
Automation PC 3100 User's manual V 2.10