B&R Automation PC 3100 User Manual page 102

Technical data
Model number
Relative humidity
Operation
Storage
Transport
Mechanical properties
Weight
1) For additional information, see Automation Help (Communication - POWERLINK - General - Hardware - IF / LS).
4.7.4.16.3.1 Pinout
The POWERLINK interface is available in the IF option 3 slot.
Variant
Wiring
Cable length
LED "Link" (a)
Orange (light)
LED "Status" (b)
Green/Red
POWERLINK commissioning and operation
For a description of the operating modes, status and node numbers of the POWERLINK interface(s), see
"LED "S/E" (LED "Status/Error")" on page
4.7.4.16.3.2 Driver support and firmware update
To ensure the functionality of the interface option, the following minimum versions must be used:
• APC3100 MTCX: V4.22
• APC3100 BIOS: V1.20
• Automation Studio: V4.9
The driver is part of the Automation Runtime and the firmware is part of Automation Studio. The module is auto-
matically brought up to this level.
To update the firmware contained in Automation Studio, a hardware upgrade must be performed (see
Project management / Workspace / Upgrades in Automation Help).
102
POWERLINK interface
RJ45, female
S/STP (Cat 5e)
Max. 100 m (min. Cat 5e)
On
Link (a connection to a POW-
ERLINK network exists)
On
POWERLINK status
see "LED "S/E" (LED "Status/Error")" on page 242
242.
5ACCIF04.FPLK-000
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 25 g
Active
Blinking (data be-
ing transferred)
Off
Automation PC 3100 User's manual V 2.10