5Accif02.Fpsc-000 - B&R Automation PC 3100 User Manual

4.7.4.14 5ACCIF02.FPSC-000

4.7.4.14.1 General information
Interface option 5ACCIF02.FPSC-000 is equipped with a POWERLINK, RS232 and CAN bus master as well as
an X2X Link master interface. In addition, 2 MB SRAM is installed.
• 1x POWERLINK interface managing or controlled node
• 1x CAN bus master interface
• 1x X2X Link master interface
• 1x RS232 interface
• 2 MB SRAM
• Compatible with APC3100, PPC3100
This interface option can only be operated in slot IF option 2, additionally uses slot IF option 2 add-on and is only
supported by Automation Runtime.
4.7.4.14.2 Order data
Model number Short description
Interface options
5ACCIF02.FPSC-000 Interface card - 2 MB SRAM - 1x RS232 interface - 1x CAN
interface - 1x POWERLINK interface - 1x X2X - For APC3100/
PPC3100
4.7.4.14.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Diagnostics
Data transfer
Certifications
CE
UL
EAC
Controller
SRAM
Size
Battery-backed
Remanent variables in power failure mode
Interfaces
COM
Quantity
Type
Variant
UART
Max. baud rate
POWERLINK
Quantity
Type
Variant
Transfer rate
Transfer
Cable length
Automation PC 3100 User's manual V 2.10
5ACCIF02.FPSC-000
0xF2E3
Yes, using LED "Status/Error"
Yes
cULus E115267
Industrial control equipment
Product family certification
2 MB
Yes
256 kB (for e.g. Automation Runtime, see Automation Help)
1
RS232, modem not supported, not galvanically isolated
10-pin, male
16550-compatible, 16-byte FIFO buffer
115 kbit/s
1
Type 4
1)
RJ45, shielded
100 Mbit/s
100BASE-TX
Max. 100 m between two stations (segment length)
Technical data
Figure
93