5Ac901.Iups-00 - B&R Automation PC 3100 User Manual

Hide thumbs Also See for Automation PC 3100:
Table of Contents

Advertisement

Technical data

4.7.6.2 5AC901.IUPS-00

4.7.6.2.1 General information
UPS IF option 5AC901.IUPS-00 used together with battery unit 5AC901.BUPS-00 allows the B&R industrial PC to
be switched off properly without data loss during a power failure.
This interface option can only be operated in slot IF option 1.
Warning!
UPS IF option 5AC901.IUPS-00 is only permitted to be operated with battery unit 5AC901.BUPS-00!
Information:
If the system is in power saving mode (S5: soft-off or S4: hibernate/suspend-to-disk), then the internal
UPS interface option charges the connected battery unit. The system's internal power supplies are
active during this procedure. This allows various actions to be performed (e.g. opening the tray of the
built-in slide-in DVD drive).
4.7.6.2.2 Order data
Model number
Short description
Uninterruptible power supply
5AC901.IUPS-00
UPS - For 4.5 Ah battery
Required accessories
Uninterruptible power supply
5AC901.BUPS-00
Battery unit 4.5 Ah - For UPS 5AC901.IUPS-00
5CAUPS.0005-01
UPS cable - 0.5 m - For 5AC901.IUPS-xx
5CAUPS.0010-01
UPS cable - 1 m - For 5AC901.IUPS-xx
5CAUPS.0013-01
UPS cable - 1.3 m - For 5AC901.IUPS-xx
5CAUPS.0030-01
UPS cable - 3 m - For 5AC901.IUPS-xx
4.7.6.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Certifications
CE
UL
HazLoc
EAC
Electrical properties
Power consumption
Deep discharge protection
Short-circuit proof
Battery charging data
Charging current
Operating conditions
Pollution degree per EN 61131-2
Ambient conditions
Temperature
Operation
Storage
Transport
108
5AC901.IUPS-00
0xD851
Yes
cULus E115267
Industrial control equipment
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
Product family certification
Max. 30 W at 1 A
Yes
Yes
2)
Typ. 1 A
Pollution degree 2
0 to 55°C
3)
-20 to 60°C
-20 to 60°C
Automation PC 3100 User's manual V 2.10
Figure
1)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apc 3100

Table of Contents