Installing The Interface Option And Ddr4 Sdram - B&R Automation PC 3100 User Manual

8.3 Installing the interface option and DDR4 SDRAM

Caution!
Interface options or DDR4 main memory modules are only permitted to be installed in a voltage-free
state.
1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power cable).
2. Carry out electrostatic discharge on the housing or at the ground connection.
3. Loosen the Torx screws (T10) of the cover. Their number may vary depending on the system unit.
4. Remove the cover.
Automation PC 3100 User's manual V 2.10
Maintenance
217