B&R Automation PC 3100 User Manual page 146

Software
7.1.6.2.1 OEM features
BIOS parameter
BIOS version
MTCX version
Realtime environment
Hypervisor environment
Automatic firmware update
Super IO
H2OUVE
Baseboard
Interface slot n
1) 2)
Panel settings
SSD monitoring service
Custom boot logo
Backup settings
1) A total of 3 interface option slots are available. Slot IF option 3 is reserved for graphic interfaces.
2) Slots that are not used are not displayed.
If no slot is used, this submenu is not available.
With BIOS V01.16, the behavior of parameters Realtime environment and Hypervisor environment has been
updated (see option "d" in the following table).
This function is supported in Automation Studio 4.7 and later. Starting with this version, it is possible to configure
hypervisor operation with or without hyperthreading for the GPOS (if the CPU used supports this).
146
Setting options Description
- Displays the BIOS version
- Displays the MTCX version
Disables/Enables the real-time environment
Disabled
This must be enabled for real-time operating systems such as Automation Runtime.
Enabled
Disabled Disables/Enables the hypervisor environment
Enabling is necessary for hypervisor operation.
Parameters
Enabled
be changed during hypervisor operation.
Disabled Disables/Enables automatic firmware updates for the mainboard, SDL and SDL4 cards
Enabled
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Enter Opens submenu
Table 75: Advanced - OEM features
"VT-d" and "Intel (VMX) Virtualization Technology"
"Super IO" on page 147
"H2OUVE" on page 148
"Baseboard" on page 148
"Interface slot n " on page 148
"Panel settings" on page 149
"SSD monitoring service" on page 149
"Custom boot logo" on page 150
"Backup settings" on page 150
Automation PC 3100 User's manual V 2.10
are enabled and cannot