B&R Automation PC 3100 User Manual page 86

Technical data
Terminating resistor
A terminating resistor for the CAN interface is already integrated in the IF option. This can be switched on or off
with a switch (1); it is necessary to open the system unit for this. A switched-on terminating resistor is indicated by
a yellow LED (2) (see "Reading LED status indicators" on page
Drivers
Drivers for approved operating systems are available for download in the Downloads section of the B&R website
(www.br-automation.com) (if required and not already included in the operating system).
Approved operating systems:
• Windows 10
• B&R Linux
86
241).
Automation PC 3100 User's manual V 2.10