Hmi Service Center; General Information; Order Data - B&R Automation PC 3100 User Manual

7.9 HMI Service Center

7.9.1 General information

The HMI Service Center is software for testing B&R industrial PCs and Automation Panels. Testing covers different
categories such as COM, network and SRAM.
The test system consists of a USB flash drive with installed Windows PE operating system and the HMI Service
Center.
For details about the HMI Service Center, see the HMI Service Center user's manual. This can be downloaded at
no cost from the B&R website (www.br-automation.com).

7.9.2 Order data

Model number Short description
Accessories
5SWUTI.0001-000 HMI Service Center USB flash drive - Hardware diagnostic
software - For APC810/PPC800 - For APC910/PPC900 - For
APC2100/PPC2100 - For APC2200/PPC2200 - For APC3100/
PPC3100 - For APC51x/PP500 - For Automation Panel 800/900
- For Automation Panel 1000/5000
Information:
The following device families are only supported
starting with revision D0 of the HMI Service Center
flash drive:
Automation PC 3100 User's manual V 2.10
• Automation Panel 1000
• Automation PC 3100
• Automation PC 2200
Software
Figure
• Automation Panel 5000
• Panel PC 3100
• Panel PC 2200
213