Security - B&R Automation PC 3100 User Manual

7.1.6.3 Security

BIOS parameter
Current TPM device
1)
TPM state
TPM active PCR hash algorithm
TPM hardware support hash algorithm
TrEE protocol version
TPM availability
TPM operation
Clear TPM
Supervisor password
Set supervisor password
Set all Hdd password
Set all Hdd master password
Storage password setup page
1) Trusted Platform Module
Information:
TPM commands are executed during the boot procedure.
The next time this menu is called after a boot procedure, parameter TPM operation shows "No opera-
tion" since the inputs have already been processed.
7.1.6.3.1 Storage password setup page
BIOS parameter
CFast name n
1)
1) Displays the manufacturer ID of the CFast card in the corresponding CFast slot. 2 CFast card slots are available. They are indexed from 1 to 2.
Automation PC 3100 User's manual V 2.10
Setting options Description
- Displays the current TPM device
- Displays the TPM status
- Displays the current PCR hash algorithm
- Displays the hash algorithms supported by the hardware
1.0 Selects the TrEE protocol version
1.1
Hidden TPM invisible/visible for the operating system
Available
No operation Configuration of supported TPM functions
The setting options of this parameter depend on whether FTPM or DTPM is used, see
(Various)
"Chipset configuration" on page
Starts clearing TPM by enabling it
Disabled
Enabled
- Displays whether a supervisor password has been created
String Sets or changes the supervisor password
String Sets all HDD passwords
String Sets all HDD master passwords
Enter Opens submenu
Table 118: Security
Setting options Description
Enter Opens submenu
Table 119: Security - Storage password setup page
152.
"Storage password setup page" on page 169
"CFast name n" on page 170
Software
169