Software
7.3 RAID configuration
Advice:
When creating a RAID volume, existing data on the storage media is deleted.
Before creating a RAID volume, make sure that there is no important data on the storage media.
In order to create a SATA RAID volume and access the "Configuration utility", setting SATA mode selection in
BIOS menu "SATA and RST configuration" (see
premium with Intel Optane.
Figure 10: Advanced - PCH-IO configuration - SATA and RST configuration - SATA mode selection
Information:
This setting is required for legacy and UEFI boot mode.
180
"PCH-IO configuration" on page
Figure 11: Configured SATA mode selection for RAID volume
163) must be set to Intel RST
Automation PC 3100 User's manual V 2.10