The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2)
Switching takes place automatically.
3)
The 10 Mbit/s transfer rate / connection is only available if LED "Link" is active at the same time.
4.7.4.10.3.2 Driver support
A special driver is necessary to operate Intel Ethernet controller I210. Drivers for approved operating systems are
available for download in the Downloads section of the B&R website (www.br-automation.com) (if required and not
already included in the operating system).
Approved operating systems:
• Windows 10
• B&R Linux
Wake-on-LAN (WoL) and PXE boot are not supported.
Information:
Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.