Create Raid Volume - B&R Automation PC 3100 User Manual

Software

7.3.2.2 Create RAID volume

RAID volumes can be created via submenu
Technology" on page 141.
BIOS parameter
Name:
RAID level:
Select disks:
Disk n:
Stripe size:
Capacity:
Synchronization:
188
"Create RAID volume" on page 141
Figure 19: Creating a RAID volume
Setting options Description
String Name for the RAID volume
Default: Volume1 No special characters are permitted.
Range: Max. 16 characters
RAID0 (stripe) Selects the RAID level
RAID1 (mirror)
Recovery
(Blank) Selects the storage medium for the RAID volume. Either X (RAID0 and RAID1) or M
(master) /R (recovery) can be defined (recovery mode).
X
M
R
4 kB Selects the data block size [kB]
8 kB
16 kB
32 kB
64 kB
128 kB
INT Defines the RAID memory size [MB]
Range: Hardware-dependent
If storage media of different sizes are used, this is limited to the smaller medium.
Continuous Selects the synchronization mode
On request
Table 134: Device manager - Create RAID volume
in section "Intel® Rapid Storage
Automation PC 3100 User's manual V 2.10