B&R Automation PC 3100 User Manual page 173

BIOS parameter
Automatic failover
EFI
Legacy
1) When changing the ACPI version, make sure that the operating system used is compatible.
2) This parameter must be disabled to use ARwin and B&R Hypervisor.
7.1.6.5.1 EFI
BIOS parameter
EFI
1st device
2nd device
1)
3rd device
4th Device
5th device
6th device
7th device
8th device
1) Starting with the 2nd device, only the respective default values are specified.
7.1.6.5.1.1 EFI
BIOS parameter
EFI
Automation PC 3100 User's manual V 2.10
Setting options Description
Disabled Disables/Enables automatic failover
Enabled
Enter Opens submenu
Enter Opens submenu
Table 122: Boot
Setting options Description
Enter Opens submenu
CFast 1 Selects this device as first in the boot sequence
CFast 2
ETH1 IPv4
ETH1 IPv6
USB storage
Internal EFI shell
Other
M.2
USB CD-ROM
USB other
RAID volume
Disabled
CFast 2 Selects this device as second in the boot sequence
M.2 Selects this device as third in the boot sequence
USB storage Selects this device as fourth in the boot sequence
Selects this device as fifth in the boot sequence
USB CD-ROM
USB other Selects this device as sixth in the boot sequence
Internal EFI shell Selects this device as seventh in the boot sequence
ETH1 IPv4 Selects this device as eighth in the boot sequence
Table 123: Boot - EFI
Setting options
Enter, then:
► Keyboard: F5/F6
► Touch screen: Move items at
the gray arrows
Table 124: Boot - EFI - EFI
"EFI" on page 173
"Legacy" on page 174
"EFI" on page 173
Description
Defines the boot sequence
Software
173