Led Status Indicators - B&R Automation PC 3100 User Manual

4.6.8 LED status indicators

Assignment
1) S5: Soft-off
S4: Hibernate (suspend-to-disk)
Automation PC 3100 User's manual V 2.10
LED Color Status
(1): Green On
Power
Blinking
Red On
Blinking
Red-Green Blinking
Yellow On
(2): Yellow On
Disk
(3): Yellow On
Link
Blinking
(4): Green Blinking
Run
Green On
Red On
Orange Blinking
Explanation
Power supply OK
The device is started up; the battery state is BAD.
Information:
For additional information,
page 44.
The system is in power saving mode (standby).
The MTCX is running; the battery state is "BAD". The
system is in power saving mode (standby).
Faulty or incomplete BIOS, MTCX or I/O FPGA update,
battery state OK, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state OK, power saving mode (standby)
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state BAD, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA up-
date, battery state BAD, power saving mode (stand-
by)
1)
Information:
An update must be performed again.
Power supply not OK. The system is running in UPS
mode.
Indicates drive access (HDD, SSD, CFast)
Indicates an active SDL connection on the panel con-
nector.
An active SDL connection was interrupted due to pow-
er loss of the panel.
Information:
Check the power supply or power connection of the connected panel.
Automation Runtime is starting up.
Controlled by Automation Runtime (ARemb and AR-
win).
Application running
Controlled by Automation Runtime (ARemb and AR-
win).
Application in SERVICE mode
Controlled by Automation Runtime (ARemb and AR-
win).
A license violation has occurred.
Technical data
LED status indicator
500 ms per interval
1 2
see "Battery" on
1)
1)
1)
1 2
43