5Ac901.Irdy-00 - B&R Automation PC 3100 User Manual

Technical data

4.7.4.8 5AC901.IRDY-00

4.7.4.8.1 General information
Ready relay 5AC901.IRDY-00 is switched as soon as the B&R industrial PC has started up and all internal supply
voltages are applied. It is possible to connect additional devices to the ready relay; they will also be switched on
when the B&R industrial PC starts up.
• 1 normally closed contact, 1 normally open contact
• Compatible with APC910/PPC900 and APC3100/PPC3100
Terminal block 0TB2104.8000 is not included in delivery and must be ordered separately.
4.7.4.8.2 Order data
Model number Short description
Interface options
5AC901.IRDY-00 Interface card - Ready relay - For APC910/PPC900/APC3100/
PPC3100
Required accessories
Terminal blocks
0TB2104.8000 Connector 24 VDC - 4-pin female - Screw clamp terminal block
2.5 mm²
4.7.4.8.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Ready relay
Certifications
CE
UL
EAC
Electrical properties
Power consumption
Operating conditions
Pollution degree per EN 61131-2
Ambient conditions
Temperature
Operation
Storage
Transport
Relative humidity
Operation
Storage
Transport
Mechanical properties
Weight
1) For detailed information, see the temperature tables in the user's manual.
4.7.4.8.3.1 Pinout
Pin Pinout Description
1 NO Normally open contact
2 COM Changeover contact
3 NC Normally closed contact
4 - Not connected
78
5AC901.IRDY-00
0xD84F
Normally open contact and normally closed contact, max. 30 VDC, max. 2 A
cULus E115267
Industrial control equipment
Product family certification
Pollution degree 2
0 to 60°C
-20 to 60°C
-20 to 60°C
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 30 g
Ready relay
Figure
Yes
0.2 W
1)
Connector, 4-pin, male
1 2 3 4
NO NC
Automation PC 3100 User's manual V 2.10