B&R Automation PC 3100 User Manual page 147

Option Realtime environment (RTE)
a) Disabled
b) Enabled
c) Enabled
d) Disabled
If the complete system has been preconfigured for real-time and/or hypervisor operation, these parameters are
system specifications and grayed out. Changes in BIOS Setup are then ineffective since they are overwritten by
the system specifications during booting. In this case, configuration changes must be made in the EFI shell with
tool mtcxsvc.efi, which is part of the firmware upgrades for xPC3100 systems
177).
7.1.6.2.1.2 Super IO
BIOS parameter
CAN device
COM A
Base I/O address
Interrupt
MTCX interrupt
Advice:
COM B to COM E are only displayed if they are allocated.
BIOS parameter
COM B
Base I/O address
Interrupt
COM C
Base I/O address
Interrupt
COM D
Base I/O address
Automation PC 3100 User's manual V 2.10
Hypervisor environment (HV)
Disabled
Disabled
Enabled
Enabled
Setting options Description
- Indicates whether a CAN interface (IF option) is installed
Disable Disables/Enables COM A (SDL onboard touch screen)
Enable
0x2E8 Selects the I/O address for COM A
0x2F8
0x338
0x378
0x3E8
0x3F8
IRQ 3 Selects the interrupt for COM A
IRQ 4
IRQ 5
IRQ 7
IRQ 11
Automatic Disables the MTCX interrupt or assigns it automatically if permitted by the system con-
figuration (at least 1 IRQ free).
Disable
Table 76: Advanced - OEM features - Super IO
Setting options Description
Disable Disables/Enables COM B (LFP touch screen)
Enable
0x2E8 Selects the I/O address of port COM B
0x2F8
0x338
0x378
0x3E8
0x3F8
IRQ 3 Selects the interrupt for COM B
IRQ 4
IRQ 5
IRQ 7
IRQ 11
Disable Disables/Enables COM C (IF option 1)
Enable
0x2E8 Selects the I/O address of port COM C
0x2F8
0x338
0x378
0x3E8
0x3F8
IRQ 3 Selects the interrupt for COM C
IRQ 4
IRQ 5
IRQ 7
IRQ 11
Disable Disables/Enables COM D (IF option 2)
Enable
0x2E8 Disables/Enables the I/O address of port COM D
0x2F8
0x338
0x378
0x3E8
Table 77: Advanced - OEM features - Super IO (supplement)
Description
The default settings are used.
The system has full RTE support. Hyperthreading is disabled.
The system has full RTE and AS support. Hyperthreading is dis-
abled.
The system has RTE and AS support. Hyperthreading is enabled.
(see "PC firmware upgrade" on page
Software
147