B&R Automation PC 3100 User Manual page 60

Technical data
SDL4 LEDs
LED Color
Link (a) Yellow
Status (b) Yellow
Information:
Hot plugging output devices on the interface for service purposes is supported by the hardware and
graphic drivers of approved operating systems. Recalibration may be required for touch screen de-
vices.
A maximum of 500 mating cycles are specified for this interface.
4.7.3.3.3.2 Cable lengths and resolutions for SDL4 transfer
The maximum cable length for SDL4 transfer with a B&R SDL3/SDL4 cable is 100 meters (regardless of the
resolution of the panel).
60
Status Explanation
On Indicates an active SDL4 connection.
Off No active SDL4 connection.
On The SDL4 connection is established and OK.
Blinking No active SDL4 connection.
-
Automation PC 3100 User's manual V 2.10