For detailed information, see the temperature tables in the user's manual.
4.7.4.1.3.1 Pinout
Variant
Type
UART
Galvanic isolation
Transfer rate
Bus length
Pin
1
2
3
4
5
6
7
8
9
1)
The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
4.7.4.1.3.2 I/O address and IRQ
When operated in the xPC3100:
Slot
IF option 1 (COM C)
IF option 2 (COM D)
1)
The default I/O address and IRQ can be modified in BIOS.
4.7.4.1.3.3 Cable data
For more detailed information about the transfer rate, bus length or cable requirements for the respective inter-