B&R Automation PC 3100 User Manual page 77

Model number
Relative humidity
Operation
Storage
Transport
Mechanical properties
Weight
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
3) For additional information, see Automation Help (Communication - POWERLINK - General - Hardware - IF / LS).
4) For detailed information, see the temperature tables in the user's manual.
4.7.4.7.3.1 Pinout
Variant
Wiring
Cable length
LED "Link" (a)
Orange (light) Link (a connection to a POW-
(b)
LED "Status/Error" (c)
Green/Red
4.7.4.7.3.2 Driver support and firmware update
The driver is part of the Automation Runtime and the firmware is part of Automation Studio. The module is auto-
matically brought up to this level.
To update the firmware contained in Automation Studio, a hardware upgrade must be performed (see
Project management / Workspace / Upgrades in Automation Help).
Automation PC 3100 User's manual V 2.10
RJ45, female
S/STP (Cat 5e)
Max. 100 m (min. Cat 5e)
On
ERLINK network exists)
-
-
On
POWERLINK status see "LED "S/
E" (LED "Status/Error")" on page 242
-
5AC901.IPLK-00
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 35 g
POWERLINK
Active
Blinking (data be-
ing transferred)
Off
Technical data
77