Accessories; General Information; Order Data; Installation Accessories - B&R Automation PC 3100 User Manual

9 Accessories

The following accessories have undergone functional testing by B&R in connection with the device used and can
be operated with this device. Possible limitations regarding operation with individual components other than the
complete system must be taken into account, however. All individual specifications of the components must be
observed when operating the complete system.
All components listed in this manual have undergone intensive system and compatibility testing and been approved
accordingly. B&R cannot assume any functional warranty for accessories that have not been approved.

9.1 General information

The following products can be used in the event of loss or for conversion or retrofitting.

9.1.1 Order data

Material number Description
5ACCRHMI.0000-000 HMI grounding clip
5ACCRHMI.0001-000 Retaining clips 16 mm - 14 pcs. with 16 mm setscrews - For AP1000 and AP9x3
5ACCRHMI.0002-000 Retaining clips 20 mm - 14 pcs. with 20 mm setscrews - For AP1000 and AP9x3
5ACCRHMI.0003-000 Retaining clips 25 mm - 12 pcs. with 25 mm setscrews - For AP1000 and AP9x3
5ACCRPC3.0006-000 APC/PPC3100 slot covers - 3x IF option - 1x graphics option
5ACCRPC3.0007-000 APC/PPC3100 CFast cover
5ACCRPC3.0012-000 APC/PPC3100 battery holder - 1x orange - 1x gray

9.2 Installation accessories

Suitable tool sets can be ordered to easily install B&R industrial PCs and converters.
• ESD-protected
• Screwdriver with quick-change chuck
• Consisting of:
5ACCRHMI.0006-000
° 1x torque screwdriver: 0.3 to 1.2 Nm
° 1x bit set (5 pieces): Hex recess (2.5 mm, 3.0 mm, 5.0 mm), Torx (T10, T20)
9.2.1 Order data
Model number Short description
Other
5ACCRHMI.0006-000 HMI installation tool for control cabinet - 1x torque wrench ESD
0.3 - 1.2 Nm - 1x hex-head bit 2.5, length 89 mm - 1x hex-head
bit 3.0, length 89 mm - 1x hex-head bit 5.0, length 89 mm - 1x
Torx 10 bit, length 90 mm - 1x Torx 20 bit, length 89 mm
Automation PC 3100 User's manual V 2.10
Accessories
Figure
225