Create Raid Volume; Delete Raid Volume - B&R Automation PC 3100 User Manual

4.3.1.2 Create RAID volume

Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.3054
Copyright(C) Intel Corporation. All Rights Reserved.
Enter a unique volume name that has no special characters and is
[ ]-Change
­¯
BIOS parameter
Name
RAID level
1)
Disks
2)
Strip size
3)
Capacity
Sync
4)
Create volume
1) Grayed-out parameters cannot be modified in the currently selected RAID level.
2) This setting is only possible if RAID level is set to Recovery.
3) This setting is only possible if RAID level is set to RAID0(Stripe).
4) This setting is only possible if RAID level is set to Recovery.

4.3.1.3 Delete RAID volume

The "Delete RAID volume" menu option can be used to format the RAID drive, making it non-RAID. The drive to
be deleted is selected and then deleted by pressing <DEL>.
Information:
This option deletes all data on the drive, including the operating system.
Automation PC 3100 User's manual V 1.00 Translation of the original documentation
[ CREATE VOLUME MENU
Name: Mirror
RAID LEVEL: RAID1(Mirror)
Disks:
Select Disk
Strip Size: N/A
Capacity: 59.6 GB
Sync:
N/A
Create Volume
[ HELP
16 characters or less.
[TAB]-Next [ESC]-Previous Menu
Figure 54: Creating a RAID volume
Setting options Description
String Name for the RAID volume
Default: Volume1 No special characters are permitted.
Range: Max. 16 characters
RAID0 (Stripes) Selects the RAID level
RAID1 (Mirror)
Recovery
Master Defines the storage media mode
Recovery
4 KB Selects the data block size [kB]
8 KB
16 KB
32 KB
64 KB
128 KB
INT Defines the RAID memory size
Range: Hardware-dependent
If storage media of different sizes are used, this is limited to the smaller medium.
Continuous Selects the synchronization mode
On request
Enter Creates a RAID volume according to the configuration
Table 213: Configuration Utility - Create RAID volume
]
]
[ENTER]-Select
Software
183