Create Raid Volume - B&R PC 3100 User Manual

Key
Ctrl+E
Z/Y
N
Pause

7.3.1.2 Create RAID volume

Enter a unique volume name that has no special characters and is
[ ]-Change
­¯
BIOS parameter
Name
RAID level
1)
Disks
2)
Strip size
3)
Capacity
Sync
4)
Create volume
1) Grayed-out parameters cannot be modified in the currently selected RAID level.
2) This setting is only possible if RAID level is set to Recovery.
3) This setting is only possible if RAID level is set to RAID0(Stripe).
4) This setting is only possible if RAID level is set to Recovery.
Panel PC 3100 panel mount device User's manual V 2.10
Function
Saves any changed settings and exits setup.
Confirm ("Yes"). (QWERTZ/QWERTY)
Cancel ("No").
Booting is paused, resume by pressing any key.
Table 183: BIOS-relevant keys in the RAID Configuration Utility
Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.3054
Copyright(C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name: Mirror
RAID LEVEL: RAID1(Mirror)
Disks: Select Disk
Strip Size: N/A
Capacity: 59.6 GB
Sync:
N/A
Create Volume
16 characters or less.
[TAB]-Next
Figure 12: Creating a RAID volume
Setting options Description
String Name for the RAID volume
Default: Volume1
No special characters are permitted.
Range: Max. 16 characters
RAID0 (Stripes) Selects the RAID level
RAID1 (Mirror)
Recovery
Master Defines the storage media mode
Recovery
4 kB Selects the data block size [kB]
8 kB
16 kB
32 kB
64 kB
128 kB
INT Defines the RAID memory size
Range: Hardware-dependent
If storage media of different sizes are used, this is limited to the smaller medium.
Continuous Selects the synchronization mode
On request
Enter Creates a RAID volume according to the configuration
Table 184: Configuration Utility - Create RAID volume
]
[ HELP ]
[ESC]-Previous Menu [ENTER]-Select
Software
271