Introduction - Emerson PACSystems RSTi-EP User Manual

User Manual
GFK-2958J
This manual describes the RSTi-EP remote I/O system. The products of the RSTi-EP series are
intended for use in industrial automation. A RSTi-EP station with network adapter and
connected modules is intended for the decentralized control of systems or sub-systems. Via
the network adapter every module of a station is integrated into a fieldbus structure and
connected to the primary control unit. The RSTi-EP products conform to protection class IP
20 (in accordance with DIN EN 60529), they can be used in potentially explosive
atmospheres rated as Zone 2 (as per Directive 2014/34/EU) and in safe zones.
The observance of the supplied documentation is part of the intended use. The products
described in this manual may only be used for the intended applications and only in
connection with certified third-party devices or components.
Introductory material may be found in this chapter along with a system overview.
Chapter 2 provides information about Safety.
Chapter 3 provides Configuration instruction.
Chapter 4 provides Detailed Descriptions of the Fieldbus Network Adapters.
Chapter 5 provides Detailed Description of I/O Modules
Chapter 6 provides information on Installation and set-up.
Chapter 7 provides important information on Error! Reference source not found..
Chapter 8 provides information on Commissioning.
Chapter 9 covers the Web Server.
Chapter 10 provides detailed instructions for Replacing Components
Chapter 11 describes Disassembly and Disposal of the RSTi-EP station.
Chapter 12 covers LED Indicators and Troubleshooting
Chapter 13 provides ordering information for Accessories and Replacement Parts.
Appendix A is a Decimal/Hexadecimal Conversion Table.
Appendix B provides a Marine Certification Table.
Appendix C provides a Marine Certification Table.
CAUTION
• Prior to hot-swapping I/O modules, refer to Section 10.2, Replacing the Electronic Unit

Introduction

`Introduction
Chapter 1
Oct 2019
1