User Manual
GFK-2958J
Figure 206: Attaching the End Bracket
Note
: When installing the RSTi-EP products, make sure that you listen for the double click:
The modules are in the correct position and the connection is made only when both
snapping noises are heard.
CAUTION
•
Improper installation may prevent grounding.
•
The grounding of the modules and network adapters is only ensured if the FE spring at
the bottom is in contact with the DIN rail.
•
During installation, make sure that both release levers on the bus network adapter and
all release levers on the modules are closed before snapping onto the DIN rail.
Figure 207: Release Lever Closed
Installation
When snapping onto the DIN rail
When pushing together with the neighboring module.
Chapter 6
Oct 2019
331