Setting Up Registration Data And Password Protection - Emerson PACSystems RSTi-EP User Manual

User Manual
GFK-2958J
8. Click Details. The Network Connection Details window opens.
Figure 264
The IP address of the virtual LAN port (the USB connection) displays under IPv4 DHCP
server. The standard IP address is 192.168.1.202. The web server is started.
9.3 Setting up Registration Data and Password
Protection
If you do not set up a user, all web server functions are always accessible to every user . As
soon as you set up a user with password protection, users without a user ID will only have
read-only rights. Write access is blocked for them, which means that they cannot do the
following:
•
•
•
To set up registration data and password protection
1.
Web Server
Change parameters
Operate the station in Force mode
Load firmware updates
When you start up the web server for the first time, you are prompted to enter the
registration data. The Change login data window opens automatically. You can
access this window later via the Network Adapter status dialog box (refer to Section
9.5, Displaying and Editing the Network Adapter Status):
Chapter 9
Oct 2019
373