Emerson PACSystems RSTi-EP User Manual page 375

Remote i/o system

Hide thumbs Also See for PACSystems RSTi-EP:

Table of Contents

6. Select a module and click OK. The module is added to the Modules list in the Slave

To change the order (position) of a module, select it and click Properties. The Module

Properties dialog box displays. Enter the numerical value of the new position the module is

to have. The position numbering starts at 0.

The other information in this dialog box is generated by the GSD file associated with the

Slave module.

Commissioning

The Select New Module list of modules is determined by the .GSD for the slave type. Each type of slave

may have a different list of modules.

Properties dialog box. Add additional modules as required for your system. The

following figure shows the Modules tab after several modules have been added.

The Data field corresponds to the module's configuration identifier as defined in the PROFIBUS

specification.