Specifications: Ep-225F - Emerson PACSystems RSTi-EP User Manual

User Manual
GFK-2958J

Specifications: EP-225F

Specification
System data
Data
Interface
System bus transfer rate
Outputs
Number
Type of load
Response time
Max. output current
Breaking energy (inductive)
Switching frequency
Actuator connection
Short-circuit-proof
Protective circuit
Response time of the current limiting circuit
Module diagnosis
Individual channel diagnosis
Reactionless
Supply
Supply voltage
Current consumption from system current
path ISYS
Current consumption from output current
path IOUT
General data
Weight
For additional general data, refer to Section 1.5,
General Technical Data for I/O Modules.
Detailed Description of I/O Modules
Description
Process, parameter and diagnostic data depend on the network
adapter used (refer to Section 3.1, Order and Arrangement of
Modules).
RSTi-EP I/O communication bus
48 Mbps
16
ohmic, inductive, lamp load
low » high max. 100μs; high » low max. 250μs
per channel
per module
150 mJ per channel
Resistive load (min. 47Ω)
Inductive load (DC 13)
Lamp load (12 W)
1-conductor
Yes
Constant current with thermal switch-off and automatic restart
< 100μs
Yes
No
Yes
20.4V – 28.8V
8 mA
25 mA + load
83 g (2.93 oz)
0.5 A
8 A
1 kHz
0.2 Hz without free-wheeling diode
1 kHz with suitable free-wheeling
diode
1 kHz
Chapter 5
Oct 2019
147