Led Indicators Ep-2634 - Emerson PACSystems RSTi-EP User Manual

User Manual
GFK-2958J
If you write the value 185 decimal (1011 1001 binary) in the output byte, channel 1 is set to
24 V, channel 2 is set to GND, channel 3 is deactivated and channel 4 is set to 24 V.
The module is protected against external voltages between 0 V and the operating voltage.

LED Indicators EP-2634

For error messages refer to Chapter 12, LED Indicators and Troubleshooting
Detailed Description of I/O Modules
Green: Communication over the system bus
Module Status
Red: Module System Fault or Diagnostic Fault
1.1 Yellow: Output 0 active
1.2 --
1.3 --
1.4 --
2.1 Yellow: Output 1 active
2.2 --
2.3 --
2.4 --
3.1 Yellow: Output 2 active
3.2 --
3.3 --
3.4 --
4.1 Yellow: Output 3 active
4.2 --
4.3 --
4.4 --
Chapter 5
Oct 2019
137