User Manual
GFK-2958J
Figure 11 shows the general supply concept. For detailed description and calculation of the
current demand refer to Chapter 3.6, Example Calculation for the Power Supply and Chapter
3.7.1, Calculation of Power Loss.
Figure 11: RSTi-EP Power Supply Overview
3.2
Clearances
In order to be able to carry out the installation and subsequent maintenance work and to
ensure enough ventilation, the RSTi-EP station must be installed while observing the
following Clearances (refer to the following figures).
Attention
The minimum permissible conductor bending radii must also be observed. Earth terminals
already installed can be ignored when calculating the distance.
Configuration
Depending
on
how
implemented, the specified distances may have to be
made larger, where necessary.
the
station
shielding
Chapter 3
Oct 2019
is
21