Emerson PACSystems RSTi-EP User Manual page 347

User Manual
GFK-2958J
2.
Figure 208: Attaching the Bus Network Adapter to the DIN Rail
3.
Figure 209: Sliding the Bus Network Adapter into Position
4.
5.
Installation
Place the field bus network adapter (module side to the right) on the DIN rail so that it
audibly clicks into place.
Slide the bus network adapter to the left until it completely connects with the end
bracket. At the same time, press the bus network adapter as close as possible to the
DIN rail so that the network adapter is not tilted.
Place the first module on the DIN rail and press it down firmly. It must audibly click
into place.
Slide the module to the left until it audibly clicks into place on the bus network
adapter. At the same time, press the module as close as possible to the DIN rail so that
the module is not tilted.
Chapter 6
Oct 2019
332