User Manual
GFK-2958J
Figure 265
2. Enter the User name and Password.
3. To change the login data, enter the new user name and the new password twice,
4. To deactivate password protection, do not enter any new data, but instead, click on
5. If you have changed the login data, you must log back in again afterwards.
After registration, the connected station is displayed with all its active modules.
Figure 266: Display of the Connected Station following Registration
Web Server
click on change login.
No login information.
Note:
A forgotten password can be overwritten if the network adapter gets restarted with
no modules connected.
The status data can be displayed at all time, regardless of the state of the field bus
connection. Setup changes can only be stored while the field bus is not active.
Chapter 9
Oct 2019
374