Module Status Messages; Module Diagnosis - Emerson PACSystems RSTi-EP User Manual

Remote i/o system
Hide thumbs Also See for PACSystems RSTi-EP:
Table of Contents

Advertisement

User Manual
GFK-2958J
5
Errorbit 5
I/O-Configuration
6
error
Master configuration
7
error
8
Errorbit 8
9
Errorbit 9
10
Force mode active
11
Errorbit 11
12
Errorbit 12
13
Voltage U
error
OUT
14
Voltage U
error
IN
15
Errorbit 15

Module Status Messages

A module status byte is added to each module's process data (with the exception of safe I/O
modules). It describes the status of the module including the following information:
Module Status Messages in an EPXETC001 Station
Status value
0x0
0x1
0x80
0x81

Module Diagnosis

The network adapter`s status word reveals whether there is a module diagnosis. The history
of the module diagnosis can be interrogated via object 0x10F3. A ring buffer stores 20
diagnosis so that the current diagnosis overwrites the oldest one (sub-index 06 to 19).
Detailed Descriptions of the Fieldbus Network Adapters
Reserve bit 5, currently not used
Deviation in the configuration. The module list has changed. The list of configured
modules (Configured Module Ident List 0xF030) differs from the module list detected
by the network adapter (Detected Module Ident List 0xF050).
Master configuration error. The list of configured modules (Configured Module Ident
List 0xF030) differs significantly from the module list detected by the network adapter
(Detected Module Ident List 0xF050). No process data can be exchanged with the
modules. The station switches into PRE- OPERATIONAL state.
Reserve bit 8, currently not used
Reserve bit 9, currently not used
Web server Force mode is active. Force mode was activated through the web server.
Process data cannot be exchanged between the EtherCAT master and forced
channels.
Reserve bit 11, currently not used
Reserve bit 12, currently not used
Error in the supply voltage of outputs
Error in the supply voltage of system and inputs
Reserve bit 15, currently not used
Meaning
Plug-in station is undefined
Plug-in station = module OK
Plug-in station empty, module has been removed
Incorrect module plugged in
Chapter 4
Oct 2019
73

Advertisement

Table of Contents
loading

Table of Contents