Emerson PACSystems RSTi-EP User Manual page 98

User Manual
GFK-2958J
Register address
Access
(in hex)
0x1133 rw
0x1134 rw
0x1135 rw
0x1136 rw
0x1137 rw
0x113C – 0x113D wo
0x113E – 0x113F wo
0x1140 – 0x1141 rw
0x1142 – 0x1143 rw
0x1144 – 0x1145 rw
0x27FE ro
0x27FF ro
0x2800 – 0x287F rw
0x2A00 – 0x2A7F ro
0x8000 – 0x87FF ro
0x9000 – 0x97FF rw
0xA000 – 0xA7FF ro
Detailed Descriptions of the Fieldbus Network Adapters
Data width Description
Process alarm 0x0000 = disable, 0x0001
Word
= enable
Diagnostics alarm 0x0000 = disable,
Word
0x0001 = enable
Behavior in case of field bus error and
reference list error
Word 0x0000 = all outputs to 0, 0x0001 = set
error values
0x0002 = retain process data
Behavior when module removed
Word 0x0000 = process data continues to run
0x0001 = behavior as with field bus error
Data format 0x0000 = Motorola, 0x0001
Word
= Intel
Restore module parameters
Long
Motorola ="LOAD", Intel ="DAOL"
Save module parameters
Long
Motorola ="SAVE", Intel ="EVAS"
Long Changing IP Address 2 via Fieldbus
Long Changing Subnet Mask 2 via Fieldbus
Long Changing Gateway 2 via Fieldbus
Number of entries in the current module
Word
list
Number of entries in the reference
Word
module list
Reference module list
Long (max. 64 modules per station * 2
registers per module)
Current module list
Long (max. 64 modules per station * 2
registers per module)
Process data inputs
Module (max. 64 modules per station * 32
registers per module)
Process data outputs
Module (max. 64 modules per station * 32
registers per module)
Diagnostics
Byte (max. 64 modules per station * 32
registers per module)
Chapter 4
Oct 2019
Remarks
Corresponds to the
"DEFAULT" in the
web server
Corresponds to
"SAVE" in the web
server
These registers only
available with
EPXMBE101
There must always
be 2, 4, 6 etc.
registers transferred
There must always
be 2, 4, 6 etc.
registers transferred
Confirmation by
readout
83