Resetting The Web Server; Resetting The Network Adapter To Factory Settings - Emerson PACSystems RSTi-EP User Manual
Remote i/o system
Hide thumbs
Also See for PACSystems RSTi-EP:
- User manual (539 pages) ,
- Quick start manual (33 pages) ,
- User manual (232 pages)
Table of Contents
Advertisement
User Manual
GFK-2958J
•
•
•
•
Resetting the Web Server
You can undo all the changes that have been made since the last time that the web server
was started.
Note
:
After a reset, the network adapter is restarted. All data not protected against power failure is reset.
•
1. Click on the network adapter.
2. From the Network Adapter Status dialog box, click Reset.
Figure 271
Resetting the Network Adapter to Factory Settings
This function allows you to set up the web server in its original state as at delivery. This also
includes registration data and password protection.
•
1. Click on the network adapter.
2. From the Network Adapter Status dialog box, click Factory settings.
Figure 272
Web Server
Change the registration data and set up password protection to limit access to the
web server
Reset any changes that have been made
Access the network adapter parameters
Access the network adapter's datasheet (link to product designation)
To reset the web server
To reset the network adapter to factory settings
\
Chapter 9
Oct 2019
377
Advertisement
Table of Contents
