User Manual
GFK-2958J
Process Data Inputs EP-1318
Byte
IB0
5.4
Digital Input Module EP-1804
Figure 46: Digital Input Module
EP-1804
The digital input module EP-1804 can detect up to 4 binary control signals. One sensor can
be connected to each connector using a 2-wire connection. Both L and N connections of
each input are bridged internally. The four inputs are galvanic isolated, they can be
supplied with input voltages between 110Vac and 230Vac. Solely AC measurements can
be run.
WARNING
A status LED is assigned to each channel. All signal lines must be supplied from the same
power system.
Detailed Description of I/O Modules
Bit
Description
IX0.0
DI0
IX0.1
DI1
IX0.2
DI2
IX0.3
DI3
IX0.4
DI4
IX0.5
DI5
IX0.6
DI6
IX0.7
DI7
Figure 47: Connection Diagram EP-
1804
Chapter 5
Oct 2019
108