Potential Distribution Module For Input Current Path Ep-711F - Emerson PACSystems RSTi-EP User Manual

User Manual
GFK-2958J
With the delay module (EP-1922), switching off can be delayed by a defined time so that,
for example, a machine can be shut down in a controlled manner. The delay time can be set
in four steps between 0 and 60 seconds (corresponds to stop category 1 as per EN 60204.
Note
: All product-specific information and notes on the use of EP-19xx modules can be found in the
5.36 Potential Distribution Module for Input Current
Path EP-711F
Figure 184: Power-feed Module
for Output Current Path EP-711
The potential distribution module EP-711F provides 16 connections for +24 V from the input
current path. Potential distribution modules are passive modules without fieldbus
communication, therefore they are not considered during configuration.
Note:
Detailed Description of I/O Modules
Modules for Functional Safety Manual (GFK-2956).
A maximum of three passive modules (power-feed module, potential distribution module, and
empty slot module) may be installed in succession, however the next module to be installed must be
an active module.
Figure 185: Connection Diagram EP-711F
Chapter 5
Oct 2019
313