Configuration; Order And Arrangement Of Modules - Emerson PACSystems RSTi-EP User Manual
Remote i/o system
Hide thumbs
Also See for PACSystems RSTi-EP:
- User manual (539 pages) ,
- Quick start manual (33 pages) ,
- User manual (232 pages)
Table of Contents
Advertisement
User Manual
GFK-2958J
3.1
Order and Arrangement of Modules
The RSTi-EP system elements are designed to be installed on a profile rail according to EN
60715 [1.4 x 0.26 in (35 × 7.5 mm)], a steel strip in accordance with Annex A of EN 60715,
or a tin-plated steel strip.
Note:
modules (including max. 64 active modules) can be aligned on a network adapter.
The RSTi-EP station is usually installed on a horizontally positioned DIN rail.
Figure 9: Installation Position of the RSTi-EP Station on the DIN Rail (Horizontal
Installation)
Installation on vertically positioned DIN rails is also possible. In this case however, the heat
dissipation is reduced such that the derating values change (refer to Chapter 3.5, Current
Demand and Power Supply). In the case of vertical mounting, the network adapter must
always be arranged as the first module at the bottom and secured with an end bracket for
vertical mounting.
Configuration
Configuration
A RSTi-EP station may be built up to a maximum length of 3.28 ft (1 m). Therefore, at most 82
Chapter 3
Oct 2019
19
Advertisement
Table of Contents
