To Set The Averaging Rate; To Set The Trigger Delay Time; To Perform The Contact Check; To Set The Beeper Mode - Agilent Technologies 4349B Manual

4349B

To Set the Averaging rate

The following commands set the averaging rate:
For example, to set the averaging rate to 4,

To Set the Trigger Delay time

The following command sets the trigger delay time:
For example, to set the trigger delay time to 10 ms,

To Perform the Contact Check

The following command performs the contact check function:
For example,

To Set the Beeper Mode

The following commands set the beeper mode:
For example, to set the beeper mode to emit a beep when comparison result is PASS,

To Lock Out the Front Panel Keys

The following command locks out the front panel keys:
For example,
Remote Operation 4-7