Agilent Technologies 4349B Manual page 124

SENSe Subsystem
COMMAND
[SENSe]
:AVERage
:CORRection
:CURRent
:FUNCtion
:CONTact
[:SENSe]:AVERage:COUNt
Sets or queries the averaging rate.
< numeric value > is,
numeric
1 to 256 (integer), default is 1
256
1
Query response is < numeric value > , in < NR1 > format.
[:SENSe]:AVERage[:STATe]
Sets or queries if the averaging function is enabled.
, enables averaging.
, disables averaging.
f j g
Query response is
[:SENSe]:CORRection:COLLect[:ACQuire] OFFSet
Performs the OPEN correction for all channels. The OPEN correction takes data with which
to cancel the o set error of the 4349B and the leakage of the test xture, and takes stray
capacitance data for the contact check function. The OPEN correction data is stored in
non-volatile memory(EEPROM). (no query)
The o set error of 4349B depends on the temperature. The OPEN correction must be
performed when the temperature changes.
To perform a valid OPEN correction, con rm that required test xtures are connected to test
terminals on the front panel.
5-20 GPIB Reference
:COUNt
[:STATe]
:COLLect
[:ACQuire]
f j j j g
:DATA 1 2 3 4 ?
[:STATe]
:APERture
f j j j g
:RANGe 1 2 3 4
:AUTO
[:UPPer]
f j j j g
:DATA 1 2 3 4 ?
f j j j g
:LIMit 1 2 3 4 ?
f j j j g
:OFFSet 1 2 3 4
:VERify
<
numeric value
f j
ON
.
PARAMETER
< numeric value >
< Boolean >
OFFSet
f j
OFFSet SCAPacitance
< Boolean >
< numeric value > [MS
< Boolean >
< numeric value > [PA
< sensor function >
< numeric value > [PF
< Boolean >
>
j j g
OFF 1 0
g
j
S]
j j j j
NA UA MA A]
j
F]
4349B